WATERROWER SERVICE

Model Identification- Download
        Instruction
The WaterRower design has evolved in
        four basic steps (Series I, II, III and the S4). These design changes make
        spare parts identification a little more difficult.
Since 1993 WaterRower has had two
        manufacturing facilities, one in London, England servicing the European
        Market and one in Rhode Island, USA, servicing the American market.
Some people will know where their machine
        was made, however it is best to check. The easiest way to identify the
        country of origin of your WaterRower is the tank level gauge sticker (on
        the side of the tank) or the
        serial
        number label.
S4- All Models
The S4 WaterRower is the same 
        construction as the Series III but includes the S4 monitor.
Series III- Worldwide Model
In 1999 the basic designs of the machines
        were commonized. US WaterRowers with serial numbers above 5000 and
        manufactured after Jan'99, and UK
        WaterRowers with serial numbers above 3600 are Series III Worldwide
        Machines.
The WaterRower Series III may be
        identified by the following characteristics. 
        
Series II
Series II WaterRower's were manufactured
        in both the US and the UK (check the level gauge for the country of
        origin). Each location manufactured various versions of the machine.
Series II- US Models
The US operation manufactured two basic
        designs of the machine, the WaterRower Series II Model A and the
        WaterRower Series II Model B.
The WaterRower Series II Model A was the
        first redesign of the popular Series I and may be identified by the
        following characteristics. 
        
The WaterRower Series II Model B was the
        model which sold widely through the Nordic Track organization and may be
        identified by the following characteristics. 
        
Series II- UK Models
The UK operation manufactured two basic
        designs of the machine, the WaterRower Series II Model A and the
        WaterRower Series II Model C.
The WaterRower Series II Model A may
        be identified by the following characteristics. 
        
The WaterRower Series II Model C was very
        similar to the Model A and may be identified by the following
        characteristics. 
        
Series I
All Series
        I WaterRowers were the original design. Made in the Rhode Island
        they are quite distinctive and may be identified by the following
        characteristics. 
        
 