Series I Identification

The Series I  WaterRower's  were the original design and had the following distinctive design features;

• The serial number was located on the bracket under the footboard.

• The footboard was heart shaped, and the heel rest fixed. The footstrap was 2" (50mm) wide and closed using Velcro.

• The seat had a cut away at its rear to give clearance for the tail bone and was upholstered.

• The forward riser had two pulleys at its top where the drive strap passed through.

• The rear spacer was cylindrical, the double bungee was attached by a Velcro strap.

• The Dolley Wheels had a central axle passing right through the machine. The dolley wheels themselves being 5" (140mm) in diameter.